Changzhou Jinyu elaborates on the use of efficient universal crusher

Efficient universal crusher tips:

1. Before starting the pulverizer, first turn the rotor by hand to check whether the teeth, hammer and rotor are flexible and reliable, whether there is collision in the shell, whether the direction of rotation of the rotor is consistent with the direction indicated by the arrow, power machine and smash Machine lubrication is good.

2. After the pulverizer is installed, check the fastening condition of each fastener. If it is loose, tighten it. Also check that the belt tightness is appropriate.

3. Efficient universal crusher and power unit should be installed firmly. If the pulverizer is fixed for a long time, it should be fixed on the cement foundation; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron and ensure the pulley of the power machine (diesel or electric motor) and the pulverizer. The slots are in the same plane of revolution.

4. Do not change the pulleys casually, in case the rotation speed is too high, the explosion chamber will explode, or the rotation speed will be too low, which will affect the working efficiency of the crusher.

5. After the pulverizer starts, it should be idling for 2~3min. After no abnormal phenomenon, it will be fed again.

6, at work should pay attention to the operation of the pulverizer at all times, the feeding should be uniform, do not overload work for a long time. If vibration, noise, bearing and body temperature are too high, and the material is sprayed outward, stop the machine immediately and check it out.

7, string oil prescription contains a lot of oily drugs, such as peach kernel, cypress kernel, jujube kernel, suzi, walnuts and so on. When pulverizing, the pulverized drug in the prescription is firstly researched into a fine powder, and the oleaginous drug is mixed and pulverized; or the oleaginous drug is kneaded into a paste, and then mixed with other fine powder and then pulverized.

8. In the prescription (string research), there are a lot of viscous materials such as mucus, sugar or resin glue, such as cooked land, raw land, alfalfa, jujube, longan meat, hawthorn meat, yellow essence, polygonatum, asparagus, wheat. Winter and so on. When pulverizing, the viscous drug in the prescription is first mixed and pulverized into coarse powder, and then the viscous drug is successively mixed and pulverized once; or the viscous drug is mixed with other medicinal materials for coarse pulverization, and the coarse pulverized material is spread again. The large particles or small pieces were formed, and after sufficiently drying at 60 ° C, the mixture was pulverized again.

9. Mixing and pulverizing (co-study) is to mix all or part of the drugs together after the drugs in the prescription are properly treated. Most of the medicinal materials in the compound preparation are pulverized by this method. The pulverization and the mixing operation are carried out together with high efficiency. However, when the prescription contains a large amount of viscous and oily ingredients or animal skin, meat, bones and other materials, it is easy to smash after special treatment. Common methods are: "string material", "string oil", "steamer" and so on.

Efficient universal crusher is suitable for pharmaceutical, chemical, metallurgy, food, construction and other industries. The processing of hard and difficult materials, including plastic, copper wire, Chinese herbal medicine, rubber, etc., can also be used as a supporting equipment for the micro-grinder and superfine grinding machine. Its powder collection chamber adopts a fully enclosed sound-absorbing structure, which can effectively reduce the working noise.