One ten thousandth electronic balance operation steps / methods / precautions
1. Check the balance and adjust the balance to the horizontal position.
2. One-tenth of the electronic balance checks whether the power supply voltage matches (if necessary, configure the voltage regulator), and analyzes the electronic balance to warm up to the required time according to the requirements of the instrument.
3. One-tenth of the electronic balance is warmed up for a sufficient time to turn on the balance switch, and the analytical balance automatically performs sensitivity and zero adjustment. After the electronic balance is displayed, the balance can be weighed.
4. When one-tenth of the electronic balance is weighed, put the clean weighing bottle or weighing paper on the weighing pan, close the side door with the precision balance, and press the peeling button on the balance. One thousandth of the balance will automatically check the zero point, the balance Then gradually add the substance to be weighed, one ten thousandth of the balance until the required weight.
5. One thousandth of an electronic balance is called the weight of the substance. The actual value displayed on the balance display when the mark appears in the lower left corner of the display.
6. One-tenth of the electronic balance should be removed in time to remove the weighing bottle (paper). One-tenth of the balance closes the side door, and the one-thousandth of the balance cuts off the power supply and registers the usage.
Blackhead Suction Tool,Best Blackhead Remover,Electric Blackhead Remover,Best Blackhead Suction Remover
Shenzhen Jie Zhong Lian Investment Co., Ltd. , https://www.szmeizon.com