1. Treatment of mold and eyepieces for mold and fogging Prepare 30% absolute ethanol + 70% diethyl ether. Separate the different lenses into desiccant containers, preferably with cotton swabs, gauze, soft brushes, etc. Something to wipe, pay attention not to rub hard to prevent damage to the coating layer. The oil mirror was cleaned at the time, especially the 100X oil mirror. If it was not handled properly, the front piece was easy to be immersed or opened. The eyepiece can be removed and cleaned by itself. The 16X eyepiece should be protected against the reverse. The front piece is concave. Do not remove the objective lens. The pointer should not be made with hair, it is easy to stain the lens, and the manufacturer can be equipped with a pointer. It is best to concentrate on maintenance once in 2 months. When the microscope is used for a long time, each lens should be labeled to avoid mismatching.
2. Cleaning and cleaning the lens Use softer things such as cotton swabs, gauze, soft brushes, etc., pay attention to gentleness and slowness. Some of the more stubborn stains such as oil stains, fingerprints, etc., can be gently wiped off with a clean soft cotton cloth, cotton swab lens paper, etc. If the oil is wiped off from the oil mirror, apply lens paper, soft cotton cloth or gauze and gently wipe off the xylene. Note that do not use xylene to clean the entrance lens at the bottom of the binocular tube or the prism surface inside the eyepiece. Because pure alcohol and xylene are easily burned, care should be taken not to ignite these liquids when turning the power switch on or off. Take precautions.
3. Cleaning of paint and plastic surfaces We oppose the use of organic solvents (such as alcohol, ether, thinner, etc.) to clean the paint and plastic surfaces of the instrument. It is recommended to use silicon cloth, and more stubborn stains can be used for soft cleaning. To clean. The plastic surface can be cleaned only with a soft cloth dipped in water.
4. Treatment of the microscope idle When the microscope is not used for a long time such as holiday, please cover it with a plastic cover and store it in a dry place to prevent dust and mildew. At the same time, we strongly recommend that you store the objective lens and eyepiece in a container such as a desiccator and put some desiccant.
5. Regularly check the fineness and preciousness of the microscope and ask us to take it more. In order to maintain its performance stability, it is recommended to check and maintain regularly.
2. Cleaning and cleaning the lens Use softer things such as cotton swabs, gauze, soft brushes, etc., pay attention to gentleness and slowness. Some of the more stubborn stains such as oil stains, fingerprints, etc., can be gently wiped off with a clean soft cotton cloth, cotton swab lens paper, etc. If the oil is wiped off from the oil mirror, apply lens paper, soft cotton cloth or gauze and gently wipe off the xylene. Note that do not use xylene to clean the entrance lens at the bottom of the binocular tube or the prism surface inside the eyepiece. Because pure alcohol and xylene are easily burned, care should be taken not to ignite these liquids when turning the power switch on or off. Take precautions.
3. Cleaning of paint and plastic surfaces We oppose the use of organic solvents (such as alcohol, ether, thinner, etc.) to clean the paint and plastic surfaces of the instrument. It is recommended to use silicon cloth, and more stubborn stains can be used for soft cleaning. To clean. The plastic surface can be cleaned only with a soft cloth dipped in water.
4. Treatment of the microscope idle When the microscope is not used for a long time such as holiday, please cover it with a plastic cover and store it in a dry place to prevent dust and mildew. At the same time, we strongly recommend that you store the objective lens and eyepiece in a container such as a desiccator and put some desiccant.
5. Regularly check the fineness and preciousness of the microscope and ask us to take it more. In order to maintain its performance stability, it is recommended to check and maintain regularly.
Co2 Cylinder,Co2 Fire Extinguisher Cylinder ,Fire Cylinder Co2,Co2 Cylinder Fire Extinguisher
NINGBO TOMAN IMP. & EXP. CO., LTD , https://www.tdotmfiresolution.com