Laboratory destoner uses raw material and stones density difference to separate stones from seeds. It is used after seed cleaner & grader processing and Gravity Separator processing. It is normally used for vegetable seeds, grass seeds, flower seeds and Other small seeds cleaning. Lab destoner is for fining cleaning to remove the stones, lumps.
Working principle
The destoner worktable is a rectangular structure. The top of lab destoner table is mesh grid, the middle is a perforated aluminum plate, and the bottom is wooden air guiding structure. The hopper is located in middle of this worktable; by adjusting the vibration frequency of the worktable and the bottom blowing air volume to achieve the separation of seeds and heavier impurities. The raw material is rapidly delaminated at the seed feeding location; heavier impurity move along the slanted sides of the rectangle to the upper end, and the lighter seed move to the lower end along the rhomboid. Table vertical length, table vibration frequency, the bottom fan air volume are adjustable to meet the small size seeds, different density seeds, sorting requirements. Lab de stoner brings further study basis data of the small seeds characteristics.
Parameter reference:
Name |
Laboratory destoner |
Model |
5XQS-L |
Capacity |
50 kg/h |
Air blower power |
0.37 kw |
Vibration power |
0.13 kw |
Vibration frequency |
0-600 times/min |
Platform inclination angle |
0-3° |
Amplitude |
15 mm |
Dimension |
1000×700×1440 mm |
1. Feeding hopper
2. Hopper controller
3. Working table
4. Drive system
5. Bottom air blower
6. Control panel
7. Machine frame
Lab Destoner Machine,Laboratory Seed Destoner,Lab Seed Destoner,Lab Grain Destoner
SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com