1. Increase ground temperature
Before the garlic enters the greening period, the ground temperature should be raised. The covering on the membrane, such as leaves, crop stalks, dead garlic leaves or dust, etc., should be removed as soon as possible to increase the light transmittance and raise the ground temperature. The damaged mulch should be repaired in time to enhance the effect of heat preservation and warming, and promote the early rejuvenation of mulching garlic.
2. Fertilizer and water management
After entering the "Jingzhe" solar term, choose watering and topdressing in the morning on sunny days for 3 to 5 consecutive days, combined with watering acres and fertilizing 20 kg plus 15 kg nitrogen and potassium fertilizer. In case of special drought, you can water once in late March. In principle, do not water too early, otherwise it will easily cause disease or secondary garlic growth. After each watering, it should be cultivated in time to raise the ground temperature to protect the roots and seedlings. If the leaves have yellow tips before and after the Ching Ming Festival, a second topdressing should be carried out in time, mainly using quick-acting nitrogen fertilizer, the usage amount per mu is 20 kg, and the watering frequency should be increased in a timely manner, generally watering once every 10-15 days. Promote plant growth.
3. Prevent and control diseases
The temperature in spring is low, and it is prone to cold weather, which affects the normal growth of garlic. At the end of March, when garlic enters the greening period, choose to spray "Bihu" or brassin on the leaves in the afternoon on a sunny day to improve its resistance to stress. Leaf blight and gray mold are common diseases of garlic in spring. In the early stage of the disease, small white dots appeared on the tip of garlic leaves or light brown oblong disease spots appeared on the surface of the leaves. When the disease was severe, the leaves died, the base rotted, and the garlic plants fell down. When the diseased plant rate reaches 15%, use 50% carbendazim 800 times solution or 20% Fenmeining 2000 times solution spray for control.
Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone
4G Mini Camera Structural components
The main structures and components of the camera can be listed from the working principle of the camera:
1. LENS
Lens structure, consisting of several lenses, including plastic lens or glass lens
2. Image sensor
It can be divided into two categories:
CCD (charge couple device): charge coupled device
CMOS (complementary metal oxide semiconductor): complementary metal oxide semiconductor
3. Digital signal processing chip (DSP)
There are many DSP manufacturers, such as VIMICRO 301P/L, SONIX 102/120/128, ST (Logitech LOGITECH's DSP provider), SUNPLUS (SUN+focuses on the development of CIF and VGA for single chip, but the image quality is average), PIXART (original phase), PAC207, SQ930C, etc.
4. Power supply
Two working voltages are required inside the camera: 3.3V and 2.5V. The latest process chip can use 1.8V.
Some cameras also use video transmission lines for synchronous power supply without external power lines.
We are manufacturer of 4G Mini Camera in China, if you want to buy Shenzhen Mini Hidden Camera,1080P Wifi CCTV,Intelligent Dv please contact us.
Hidden 4G Mini Camera,Shenzhen Mini Hidden Camera,1080P Wifi CCTV camera,Intelligent Dv Camera Mini,Recorder Wireless Camera,Mini Spy Hidden Camera HD
Shenzhen Fuvision Electronics Co., Ltd. , https://www.szsolarcamera.com