Transgenic maize line MON810 gene nucleic acid detection kit instruction manual

Transgenic maize line MON810 gene nucleic acid detection kit (PCR-fluorescence probe method)

â—† Product Description

The transgenic detection series can amplify specific nucleic acid fragments of transgenic components in food, feed and other samples, and judge the results by real-time amplification curve. This product is used for the detection of MON810 gene in transgenic maize line with a detection limit of 0.1% .

â—† Product composition (48 test)

â—† Applicable instruments

A PCR instrument such as a fluorescent PCR machine (ABI 7500, CFX 96, Mx 3005P, LineGene 9600).

â—† Self-supplied supplies and instruments

1 sterilize 1.5mL or 2.0mL centrifuge tube; 2 sterilize 0.2mL PCR tube or octa tube; 3 ice box; 4 pipette (11-10μL, 10-100μL, 100-1000μL) and matching sterilization tips 5 centrifuge; 6 vortex mixer; 7 metal bath; 8 homogenizer, mixer or mortar and other grinding equipment; 9 electronic balance.

â—† Notes

1. This reagent has high detection sensitivity. In order to prevent pollution, the experiment is to be partitioned.

1) First zone: reagent preparation zone.

2) Second zone: sample preparation area.

3) Zone 3: Amplification and product analysis zone.

★ It is best to physically isolate the partitions to avoid contamination caused by human factors.

2. Wear work clothes and latex gloves during the experiment, use pipettes, and treat all waste generated in the test in time.

3. Strictly follow the operation steps, reagent preparation and sample loading steps should be carried out on ice in strict accordance with the instructions.

4. The components in the reaction solution are sensitive to light and should be stored away from light. The reagent should be completely thawed before use, but repeated freezing and thawing should be avoided. It is recommended to centrifuge for 30 seconds before use, and store the reaction solution in an appropriate volume according to the frequency of detection.

5. After the reaction is completed, the expansion tube should be placed in a sealed bag and discarded. On the same day, the lid is opened and the aerosol is easily contaminated. It is forbidden to open the lid.

6. Do not mix and use different batches of reagents and use them within the validity period.

â—† Sample processing

Samples prepared by the method of GB/T 19495.3-2004 Detection of nucleic acid extraction and purification of genetically modified products or other standards are prepared and used for storage.

For detailed steps, please follow the standard operation or check the food safety software.

â—† Experimental operation

The reagents were completely thawed and the components were centrifuged for 30 s.

1. Reagent preparation (reagent preparation area, placed in an ice box):

If there are N samples to be tested, refer to the table below, calculate the amount of reaction solution according to N+2 (N samples to be tested + 1 negative control + 1 positive control), vortex and mix, centrifuge for 30s, divide Installed in a 0.2 mL PCR tube.

1. Template preparation (sample preparation area)

It is recommended to use the supporting plant genomic DNA extraction series products. The specific process is detailed in the product manual.

3. Add a template (sample preparation area, placed in an ice box)

5 μL of the template was added to the PCR tube containing the reaction solution in the first step, and the order was NG-P, the sample template to be tested, and PG-MON810-P. The mixture was vortexed for 30 s, centrifuged for 1 min, and the PCR amplification reaction was immediately performed.

4. Amplification reaction (amplification and product analysis area)

Using a real-time PCR instrument, the fluorophore was selected for FAM and the quencher group was selected for TAMRA.

Set up the amplification reaction according to the following conditions:

6. Baseline and threshold settings

The baseline adjustment takes 3-15 cycles of fluorescence signal and the threshold line should exceed the highest point of the negative control amplification curve.

â—† Result judgment

The sample has no Ct value, and the curve is straight or slightly oblique. There is no “S” type amplification curve, and the sample can be reported negative. It does not contain the transgenic maize line MON810 component or the content is lower than the detection limit;

The test sample Ct ≤ 40, the curve shows an "S" type amplification curve, which can directly report the sample positive, containing the GM810 component of the transgenic maize line;

Test sample 40 < Ct ≤ 45, a repeated experiment is required. If the Ct value is still between 40 and 45 and there is an "S" type amplification curve, and the negative control has no Ct value, the report sample is positive, otherwise the report sample is negative.

• The NG reaction is a smooth straight line, and the PG reaction is an "S" type amplification curve. The test result is valid, otherwise it is invalid. If the duplicate test results are still invalid, please contact technical support.
• 

Finished Drugs

Pharmaceuticals finish product is the main product of Ningbo Voice Biochemic Co., Ltd.. The product line covers almost all the dosage forms, including tablets, capsules, small volume injections, infusions, eye/ear drops, creams and ointments, powder for injections and Aerosols. All finish products are produced in the GMP standard workshop.

Our pharmaceutical finish products are registered in the countries of Asia, Africa and South America under our own brand: VOICE, which is have won a high reputation in the marketing countries. Together with our own trade mark, the packaging of all pharmaceuticals finish products are well designed according to the requirement of different market..

Cardiovascular Drugs,Antipyretic Analgesics,Antiviral And Antibiotics,Finished Pharmaceutical Products

NINGBO VOICE BIOCHEMIC CO. LTD , https://www.medicine-voice.com