The sugar pulverizer is mainly used for smashing sugar materials such as white sugar, sugar cubes, rock sugar, brown sugar, glucose, natural sugar, etc. It can be pulverized separately or mixed with other materials. There is no melting phenomenon during the pulverization process, no dust pollution. , crushing fineness: 8-150 mesh (adjustable), the time output can reach 50-5000kg, made of all stainless steel, fully in line with the health standards of various industries. White sugar pulverizer is widely used in pharmaceutical factories, pharmacies, large and small hospitals, preparation rooms, Chinese pharmacies, clinics, food processing plants, etc. Crushable Chinese medicine, plant roots, stems, leaves, flowers, fruits, bark, dehydrated vegetables, chemical raw materials, plastics, mica, graphite, pearls, charcoal, cellulose, animal skin, ore.
The sugar pulverizer is composed of a feeding part, a pulverizing system, a fan blade device, a suction dust removing system and an air guiding system, and the driving device main body is composed of a crushing box, a hopper, a pulverizing knife, a ring gear, a screen mesh, a wind blade, and the like. The material consists of a pipeline, a cyclone separator and a shut-off fan. The dust removal has a filter bag and an induced draft fan. The machine enters the crushing chamber through the material inlet, and under the impact of the high-speed rotating blade in the crushing chamber, the material is twisted to the ring gear fixed on the body, causing impact, shearing, and materials and materials, materials and blades, and ring gear. Collision, friction, and shear are alternately pulverized. After the pulverized material, under the action of the thrust of the positive pressure airflow generated by the high-speed wind blade on the side of the crushing chamber, the small powder particles overcome the self-weight, and the airflow passes over the screen, and enters the cyclone through the discharge valve through the discharge valve. A part of the ultra-fine dust is recovered by a pulse dust collector (more than 99%), and the clean air is discharged into the atmosphere after dust removal. The machine cavity does not generate excessive heat, ensuring that the properties of the material do not change.
White sugar pulverizer operation process
(1) Rotate the handwheel. When it is loose to a certain extent, push the handwheel to the left to push the door of the crushing chamber.
(2) Loosen the fixing screw of the crushing chamber, remove the ring gear, take out the sieve, replace it with a suitable sieve, and attach the ring gear.
(3) Close the smashing chamber door cover and tighten the smashing chamber fixing screws.
(4) Open the discharge door cover, connect the receiving bag to the discharge hopper, and then tie the bag.
(5) Close the discharge door cover.
(6) Turn on the power switch. After turning on, perform the no-load test for 1-2 minutes, then adjust the material flow. Turn the material and re-feed.
medical Angio Closure Pad,angio syringe,Angio Closure Pad
Anesthesia Medical Co., Ltd. , https://www.jssinoanesthesias.com