The working principle of the high -speed chopping machine is that the high-speed rotation of the blade and the rotation of the tray are simultaneously performed, so that the raw materials are evenly chopped or muddy, and the various raw materials can be uniformly mixed together to achieve a good emulsification effect. A variety of speeds can be used to achieve a more ideal mixing effect, and the use of automatic discharge makes work easier and more efficient. So now many processors are using high-speed choppers. Let's take a look at the operating procedures of the high-speed chopper .
1. Check the knife set before working on the chopping machine. The nut at the front end of the spindle should be tightened before each boot.
2. Do not put your hand under the knife cover of the crucible when starting the machine to avoid personal injury.
3. When the machine is moving, do not place the object on the cover of the machine, because the machine will need to move when it is running. If the object falls into the pot, it will cause the blade to break.
4. Check the sharpness and hygienic condition of the blade before starting the machine. Is there any foreign object in the turntable?
5, before investing in materials, you should carefully check the materials, do not have hard objects, etc., so as not to damage the tool.
6. After the material is put in, the belt speed should be from low to high after the turntable is turned on.
7. The high-speed chopping machine should pay attention to the temperature of the material during work. When necessary, add ice.
8. Do not start the crucible and the cutter shaft frequently, so that it will not wear the machine.
9. In order not to cause damage to the hydraulic system, manual stop is required.
10. After the work is finished, clean the machine. Do not splash water on the electric cabinet. You must turn the power off before you can clean it.
11. Follow the manual of the high-speed chopper.
12, in the speed conversion, pay attention to safety, do not put your hands in the crucible.
13. When the glass cover is open, you can discharge and press the button.
14. When the glass cover is not open or not fully open, the discharge button cannot be pressed.
15. If the chopper is in operation, the staff member cannot leave the job.
16. In case of emergency, please press the emergency stop switch to stop the machine.
Color waxy corn is generally white, yellow, red, purple and black, white, yellow and purple corn is the basic color. The purple gene in a purple/white hybrid will naturally become purple if it "beats" the white gene, and vice versa, if it's a tie, what we see is a white/purple corn. Purple can turn into red corn and black corn, which is often called "red is purple, black is purple."
Mottled Corn Cut,Non Gmo Corn Cob,Mottled Waxy Corn Cut,Non Gmo Corn Cob Cut
Jilin Province Argricultural Sister-in-law Food Co., Ltd. , https://www.nongsaocorn.com