Plowing in autumn and irrigating in winter will eliminate pests and crops will be high yield in the coming year

There are a large number of old mature larvae of cotton bollworm in corn, vegetable, cotton and other crop fields. During the harvesting process, most of the cotton bollworm fall into the soil and pupate overwintering. If these bollworm pupae can survive the winter smoothly, they will bury hidden dangers for the bollworm outbreak in the coming year. Therefore, it is an urgent task to do a good job in autumn and reduce cotton bollworms, including cutworms, aphids, leafhoppers and other overwintering insect sources.

Autumn turning should be carried out as early as after the autumn harvest, so as to have sufficient time to ensure the maturation of the soil, which is conducive to the storage of late autumn precipitation in the soil, and the establishment of soil plough layer reservoirs to achieve autumn moisture in spring. If plowing is too late and it is too late to harrow the land, it will cause too much and too large surface soil, which will reduce the quality of plowing. This will not only affect the maturation of the soil, but also affect the quality of spring sowing. The depth of autumn plowing is generally 25 cm to 30 cm. .

The soil moisture content is suitable, the soil is finely broken after turning, the moisture retention is good, and the turning resistance is small, and the work efficiency is high. If the soil moisture is too high, sticky strips will easily form after turning, which will turn into dead soil blocks after drying. Even if the soil is prepared for many times, it will be difficult to rake and not preserve moisture. The soil is too dry, the resistance is large, the work efficiency is low, and the farming quality is poor. Plowing in autumn should give priority to ploughing the sticky soil in order to loosen the soil and accelerate the maturation of the soil. For sandy soil with light soil texture, it is not necessary to plow or plow every other year, which is more conducive to water storage and moisture preservation, and at the same time, it can save investment in mechanical farming operations.

Plowing can turn most of the overwintering pests and germs of the farmland to the lower soil layer, destroying its overwintering place, making it impossible to overwinter. Winter irrigation can make the water in the soil reach a saturated state, suffocate the pests that have turned into the soil, and greatly reduce the overwintering base of the pests. Therefore, it is recommended that the plots with water sources and irrigation conditions should be prepared in time for winter irrigation after the fall. Winter irrigation is usually carried out before the soil is frozen, about mid-November, and can be adjusted according to climatic conditions. Plots with small soil leakage can be carried out during freezing, so as to freeze with irrigation and seepage. For sandy loam soil, 70 cubic meters to 100 cubic meters per mu can be irrigated, and 60 cubic meters to 70 cubic meters per mu for other soils. Plots with large leakage should be carried out after freezing.

Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone

Extraction Kit Magnetics Bead Method

This standard specifies the terms and definitions, classification, technical requirements, test methods, identification, labels and instructions for use, packaging, transportation and storage of nucleic acid extraction kits (magnetic beads method) (hereinafter referred to as "kits"). This standard It is suitable for extracting and purifying human genomic nucleic acid and its fragments from various clinical samples such as serum, plasma, whole blood, cerebrospinal fluid, milk, saliva, urine, sputum, swab, tissue or paraffin-embedded tissue by magnetic bead method , Pathogen nucleic acid kit. Pathogen nucleic acid includes deoxyribonucleic acid (DNA), ribonucleic acid (RNA), etc. This standard does not apply to nucleic acid extraction reagents contained in closed systems that cannot extract nucleic acid extraction products for detection.

This kit uses magnetic beads with unique separation function and a unique buffer system to separate and purify high-quality virus from serum, plasma, lymph, cell-free body fluid, cell culture supernatant, urine or various virus preservation solutions DNA/RNA. The uniquely embedded magnetic beads have a strong affinity for nucleic acids under certain conditions, and when the conditions change, the magnetic beads release the adsorbed nucleic acids, which can achieve the purpose of rapid separation and purification of nucleic acids. The whole process is safe and convenient, and the extracted viral DNA/RNA has high yield, high purity, stable and reliable quality, and is especially suitable for automated extraction of high-throughput workstations. The nucleic acid purified by this kit can be applied to various routine operations, including RT-PCR, fluorescence quantitative PCR and other downstream experiments.

Nucleic Acid Lsolation Reagent Kits,Dna Purification Kit,Viral Rna Extraction Kits,Nucleic Acid Extraction Reagents

Jilin Sinoscience Technology Co. LTD , https://www.contoryinstruments.com

Posted on