What are the precautions for the safe use of nitrogen generators?

The nitrogen-making device uses air as a raw material, uses a carbon molecular sieve as an adsorbent, and uses a pressure swing adsorption principle to separate nitrogen and oxygen by selective adsorption of oxygen and nitrogen by a carbon molecular sieve, which is generally called PSA nitrogen production. The main part of the nitrogen generator comprises: an adsorption tower, a PLC controller, a nitrogen dust filter, a nitrogen storage tank, and compressed air as a raw material and power, and a purity of 95% to 99.9995% of nitrogen is obtained by pressure swing adsorption. The nitrogen generator needs to be used in a well-ventilated room with small ventilation, no water accumulation, no dripping, or in a clean roadway.

Let's talk about the safety precautions of the nitrogen generator:

1. The entire nitrogen generator should be carefully inspected before starting up, confirming that no tools, parts or other objects are left in the air compressor.

2. When the nitrogen generator is started, the venting valve should be in the empty state to avoid overpressure of the air compressor.

3. Welding operations should not be carried out near the oil circuit system. It is not possible to modify any pressure vessel by welding or other methods.

4. Regularly check the reliability of the safety device (such as a safety valve).

5. The maintenance and maintenance work of the nitrogen generator must be carried out under the condition of shutdown or power failure.

The equipment for nitrogen generators and nitrogen generators produced by Suzhou Hongshuo Purification Equipment Co., Ltd. is reliable and reliable. Can be widely used in chemical, electronics, textile, coal, oil, natural gas, medicine, food, glass, machinery, powder metallurgy, magnetic materials and other industries.